steps to make a paper kite

• Arts & Crafts

How to make a kite out of paper – easiest ever method

Try our magazines – get 6 issues from just £9.99!

Learn how to make a kite and get ready for the most fun kids craft activity ever!

• Share on Facebook
• Share on Twitter
• Share on Pinterest
• Share on Whatsapp
• Share on Tumblr
• Email to a friend

This competition is now closed

By Zoe Williams

Published: July 14, 2022 at 10:34 am

All you need are a couple of simple supplies to make your own simple paper kite at home. While there are several different methods out there for how to make a kite at home (each of them as clever as the next), we have kept this tutorial as a very simple paper kite DIY for children to make.

The beauty of this fun kids craft idea is you’ll only need a few supplies that you should already have lying around at home – scissors, tape, paper and string. We’ve used a bamboo skewer to reinforce our kite but you can even swap this for a straw if you don’t have any skewers to hand.

Once you’ve learned how to make a kite, ee know you’ll love it as much as we do, so  once you catch the bug there are all sorts of other fun methods you can try – turning wrapping paper into kites or making more traditional kites with more involved designs.  We’ve even included a few of our favourite kite making kits at the bottom in case you’re looking to stock up on supplies to keep your mini makers occupied in the coming summer holidays.

Of course paper kites aren’t going to be the most sturdy kite option. If you class yourself as a hardcore, adventure-loving, kite-flying family, you’ll still enjoy this paper kite activity but your kits may not survive being flown on top of a mountain! They should happily take to the skies in your local park or playground though, and let’s face it… half of the fun is in the making!

You might also like our favourite 50 craft ideas for kids or our paper craft for kids or check out our easy salt dough recipe .Kids will enjoy our how to make shrinky dinks  or inspire them by investing in  kids drawing tables with our roundup of the best ones on the market.

How to make a paper kite

You will need.

• bamboo skewer (or a straw)
• Ribbon ((optional))
• Tissue paper ((optional))

Total time:

Place the piece of paper (or you can use lightweight card) in front of you and fold in half (so the fold is halfway along the longest edge).

Mark a point with a pen along the top edge, about 3cm to the right of the folded edge (the top left corner). Then make a point along the bottom edge, about 3cm from the bottom right corner. Join up the lines. This is your first fold line.

Fold the top right corner down along the fold line you just marked.

Turn over your piece of paper over (flip it) and fold the other side to match the first (along the same fold line). The two corners should meet once you have folded this side

Unfold one of the flaps and lay your kite in front of you, flat, with one flap folded downwards. Tape all along the fold.

Lay a wooden skewer across the kite, from corner to corner, and tape in place.

Flip your kite upside down and mark a hole – a quarter of the way down the fold – from the top of the kite. Cover the hole with tape to reinforce it.

Use a hole punch or scissors to punch a hole where you have marked. Tie the hole with string – knot the string several times to make sure it won’t come loose in the wind.

At this stage, your kite is ready to fly. But now’s also a fun time to decorate it! You can paint or decorate the top of your kite with pens, paints or stickers. For our kite, we are going to show you how to add a tail of tissue paper bows. paper bows.

Make a paper bow tail

Cut some small strips of tissue paper in all different colours. Pinch and twist each one in the middle to make a series of paper bows.

Take a length of string (we’ve just used cotton thread) and tie the bows to the string, one at a time, to make a string of bows. Punch a hole at the bottom of the kite and thread the bows to it.

If you prefer, you can simplify this step by just cutting several long thin lengths of tissue paper, or grab some ribbons, and stick them to the bottom of the kite instead.

If you’ve been inspired bur our how to make a kite project but don’t actually have many craft supplies to hand at home, we can help! Here are a few of kite making kits to try…

5 of the best kite making kits

The twiddlers – 3 design your own kits.

Buy the paper kite kit from Amazon 

Kids will love colouring in their own pre-made kites – these kits make great birthday gifts or summer holiday craft projects. The kit make kit comes as a pack of 3 pre-made kites crafted in polyester fabric. You get a handle with string, storage pouch and rode, ribbon tails and coloured pens for decoration. The kit measures 65 x 65cms at its widest point, so there is plenty of surface area to catch those gusts once you have it styled up ready to take outside. Being polyester does make this more durable than a paper kite, which makes it easier for very young children who would struggle with a fragile paper version. Coming with its own storage pouch, it is designed to be stored well and used again and again, which we like a lot.

Painting kite kits

Buy the kite making kit from Amazon

This 10 pack of diamond kite kits would make a great children’s party activity – get your party guests to make their own kite, then take them outside to fly them – weather allowing of course! These kites are made from paper that has been treated to be waterproof. The big plus here is that you can used any craft material that marks paper to decorate them. Colour with pencils, crayons, paints, gel pens – you don’t need permanent markers. The kite kit comes with 10 kites measuring 40 x 50cms at the widest pointy, and 90cm long rainbow-striped ribbon tails.

Hanging kite craft kit

Buy the kite kit from Etsy

This two-pack of decorative kites are more for dressing up bedrooms and play rooms but they’ll still keep your mini makers busy creating their very own DIY home decor.

Diamond kite making kits

Buy the kite kit from Ebay

This traditional kite making kit comes with everything you need to make 10 kites – so it’s handy to have at home for play dates and parties. This is the only kit we’ve come across where you actually make the kite frame yourself using pre-cut wooden sticks and joining nodes. It is a good choice for older kids who might not want to draw on a kite before they fly it.  Being plastic, they’re more durable than paper kites, lightweight and easy to fly. But it is not great if you are trying to reduce the plastic you have in your kids’ toy box.

Crayola kite making kit

Buy the kite making kit from Ebay

Here is a simple kite making kit that works for kids who love their crayons. The paper kit comes printed, assembled and ready to fly, but you get 3 crypts crayons in the pack too, so instant colour can be added. Add in more crayons from your supplies fo a more colourful design!

More like the how to make a kite tutorial

We have loads of brilliant DIY projects for kids here on Gathered. Try our how to make friendship bracelets project and our how to make a crown out of paper walkthrough. Try our how to make slime project and our how to make balloon animals for more great techniques to learn. You should try our how to do finger knitting tutorial too.

Zoe Williams

Social networks.

Launch Editor, Gathered.how

Zoe is the launch Editor of Gathered.how. She has over a decade of craft publishing experience under her belt. She's a quilter and sewist who works with the UK’s best-selling craft magazines including Today’s Quilter, Love Patchwork & Quilting, Simply Sewing and The World of Cross Stitching. Zoe loves being immersed in Gathered’s quilting content, tweaking our tutorials and publishing new patterns. Zoe has previously written for radiotimes.com, Simply Knitting and The World of Cross Stitching and was previously Deputy Editor of Papercraft inspirations magazine. She has guest-lectured at Bath Spa University. She’s a keen quilter with 5 projects in progress at any one time and another 12 or so planned.

• Kids Crafts

BONUS £10 Amazon.co.uk Gift Card when you subscribe ! Choose your favourite magazine today.

Daily deals

• Search Search Please fill out this field.
• Martha's Blog
• Sweepstakes
• DIY Projects & Crafts
• Party Decorations & Ideas

How to Make a Kite Out of Paper

Celebrate the sunny days and perfect winds of spring with this simple, family-friendly kite made from paper, straws, string, and tape. Coated kite paper adds durability, while a decorative tissue paper overlay and glitter-painted dowel give the kite a touch of flair.

• - Martha Stewart Multi-Surface Glitter Acrylic Craft Paint in Lemon Drop
• - 1 toilet paper tube
• - 6 medium-width, sturdy straws
• - 3 yards of washi tape
• - 3 1/2 yards of twine
• -1 sheet of decorative tissue paper (20" x 30")
• - 1 sheet of kite paper (20" x 30")
• - 30-60 feet of kite string
• - Thin ribbon in assorted colors

- Paint brush (optional) - Scissors - 1/8" circle hand punch - Ruler - Pencil - Glue stick​

1. Paint toilet paper tube with two coats, waiting 1 hour between coats. 2. Let dry completely before continuing below.

ASSEMBLE THE FRAME

1. Use the hand punch to create a hole through the middle of a straw. Use scissors to widen the hole slightly so that you can slide another straw through it make the cross section of the kite. 2. Insert straws into the top of the vertical piece by pushing one inside the other until it measures 10 inches from the middle of the cross. Cut straw piece(s) as needed to fit the measurement. 3. Insert straws into the bottom of the vertical piece until it measures 15 inches from the middle. 4. Insert straws into the left and right of the horizontal straw until each side measures 8 inches from the middle. 5. Secure each straw joint by wrapping tape around it. 6. Punch a hole through the sides of each end straw, about 1/4 inch in. 7. Starting at the top of the frame, thread about 2 yards of twine evenly through the holes on each side of the frame. 8. Pull the twine to make sure that it's taut and tie a double knot at the bottom where the two sides of the frame meet. Do not cut the excess twine below the knot.

CREATE THE BODY

1. Lay the kite paper (shiny side down) on top of the tissue paper (decorative side down). Place the frame on top of the kite paper. 2. Use a ruler to draw a 1-inch seam allowance around the entire frame. 3. Remove the frame and follow the lines to cut the kite shape out of both papers. 4. Tape the frame to the kite paper at each straw joint. 5. Pick up the kite paper with the frame attached, turn it over and run the glue stick along the edges of the paper. 6. Place the kite paper and frame back on top of the tissue paper and press the edges down. 7. Fold each side of the kite over the frame and seal with tape.

ATTACH THE STRINGS AND TAIL

1. Punch holes through the sides of the straws at each end, approximately 2 inches in. 2. Thread 2 feet of twine through the top and bottom holes. Tie at both ends, allowing for slack. 3. Lift the vertical string; and underneath, thread 16 inches of twine through the left and right holes. Tie the horizontal string at both ends, again allowing for slack. 4. Lift both strings at the point of intersection and tie one end of the kite string in the middle to create a triangle. 5. Tape the other end of the kite string to the toilet paper tube and wrap the string around it several times. 6. Tie a few (4-5) ribbons to the excess twine at the bottom of the frame to create a tail.

You're done! Enjoy flying this beauty and happy crafting!

By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game New
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Hobbies and Crafts
• Kite Making and Kite Flying

How to Make a Kite

Last Updated: September 6, 2023 Fact Checked

This article was reviewed by Amy Guerrero . Amy Guerrero is an Arts and Crafts Specialist and the Owner of Sunshine Craft Co., a crafting studio based in Phoenix, Arizona. Amy specializes in macrame, DIY crafting, and teaching fiber arts. She offers monthly in-person and online workshops along with having developed a range of DIY craft kits for at-home projects. Amy holds a BS in Industrial Design from Philadelphia University. She worked as a graphic designer before starting her own business. Sunshine Craft Co. is a creative hub that offers a wide range of workshops, tools, and resources for any craft project to inspire creativity and community engagement. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 1,721,409 times.

There is nothing quite like flying a kite outdoors on a sunny, breezy day. What’s even better? Flying a kite you made yourself! Making a simple diamond kite is an easy project you can complete in one afternoon. We’ll walk you through the process step-by-step and show you how to build the frame, fashion the sail, and put it all together. Then, you can enjoy watching your very own custom kite soar across the sky.

Making the Frame

• If you want to make a larger kite, use longer sticks. Just make sure the horizontal stick is at least 4 inches (10 cm) shorter than the vertical stick.
• Make sure the sticks form a right angle to each other when they’re attached. The horizontal stick should be positioned straight across the vertical stick.
• If you’re using very thin sticks and string, you can poke holes into the ends of the sticks instead of making notches.
• Double-check that the string is taut but not too tight to prevent the sticks from bending or warping.
• The string will help the frame retain its shape as your kite soars through the air.

Measuring and Cutting the Sail

• Fabric can also work for the sail in a pinch, though it should be thick and sturdy so the sail is strong.
• When you’re finished, you should have a diamond shape on the sail, with the frame in the middle of the diamond.
• You should now have a nice, clean diamond sail that can fit snugly over the frame.

Assembling the Kite

• Check that the sail sits tightly over the frame—you don’t want it to come loose in the air!
• You can then add string to the flying line to make it longer based on your arm length and height. Sometimes, adding more string to the flying line can also help the kite to fly straighter.
• Pick a string or cloth color that matches the color of your sail so your kite looks pretty in the air.
• You could write your name on the kite so you can see your name flying in the air.

Community Q&A

Video . By using this service, some information may be shared with YouTube.

• There are many other types of kites you can make once you master the simple diamond kite, such as a delta, shed, and eddy kite. If you enjoy making this kite, look up these other kites so you can try to make a few different ones! Thanks Helpful 13 Not Helpful 5
• Old bed sheets strip down easily, at different widths, to make the tail. They can be shortened easily to adjust them, and strips can be knotted together to extend them. Wrap them around the lower bottom of the stick, between the strings, and tie. They're great for higher winds. Thanks Helpful 10 Not Helpful 7

Things You'll Need

• Plastic garbage bag, strong paper, or thin fabric
• 2 thin wood or bamboo sticks, 24 inches (61 cm) and 20 inches (51 cm)
• Cotton string or twine, at least 8 to 10 feet (2.4 to 3.0 m)
• 5-6 pieces of ribbon or cloth
• Masking or electrical tape
• Colored pencils /markers/colored paper (optional)

You Might Also Like

• ↑ https://www.pbs.org/parents/crafts-and-experiments/take-flight-with-a-diy-kite
• ↑ https://www.kite.org/about-kites/kite-plans/
• ↑ https://www.kite.org/wp-content/uploads/2020/12/simple-kite-plans-1.pdf
• ↑ https://www.kite.org/about-kites/how-to-fly-a-kite/

About This Article

To make a kite, first you'll need 2 wooden dowels that are less than 2 inches (5 cm) in diameter and about 40 inches (100 cm) long. Cut one of the dowels so it's about 6 inches (15 cm) shorter than the other one. Then, lay the longer dowel down on a flat surface, and place the shorter dowel on top of it about 4 inches (12.5 cm) above the midpoint so they're perpindicular. Wrap string around the point where the 2 dowels meet, and use hot glue to cover the string and seal the 2 dowels together. Wait a few minutes for the hot glue to dry. Next, cut a notch in the end of each dowel using a small knife. Run a long length of string around the ends of the dowels to connect the 4 ends. Use the notches you cut to keep the string in place. Pull the string tight so it's taut, then tie the 2 ends into a knot. Cut off the excess string with scissors. Now, lay your frame on top of a garbage bag or sheet of thin plastic, and outline the frame with a marker. Set the frame aside, and cut around the outline you drew, adding 2 inches (5 cm) to each side as you cut. Then, lay the frame on top of the sheet you’ve cut, and line the inside of each dowel with hot glue. Fold the excess plastic over the dowel and press it into the hot glue. Next, tie a piece of string to the end of one of the dowels. Run the other end of the string to the opposite end of the dowel and tie it there. Repeat this process with the other dowel and a second piece of string. Finally, tie the 2 lengths of string to a third piece of string at the junction where the 2 strings meet to make your brindle and line. For help making a sturdy frame that'll withstand high winds, read on! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Abby Williams

Mar 9, 2017

Did this article help you?

Apr 11, 2018

Talta Sadmardzic

May 9, 2018

Anny Johnson

Feb 4, 2018

Lauren Bryant

Mar 5, 2017

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Get all the best how-tos!

Sign up for wikiHow's weekly email newsletter

Easy Paper Kite

Introduction: Easy Paper Kite

A very easy-to-make kite. This is a great, fun craft for people of all ages, especially children. Also, this kite is extremely portable because of its small size. (It fits in a file folder!)

Step 1: Gather Materials

To make this kite, you will need: -- Typing Paper , Tissue Paper, or any other lightweight paper material 8 1/2 by 11 inch --A pair of Scissors --A sheet of Plastic (plastic file folders work best) -- Ruler or something with a straight edge -- Hot Glue Gun -- String -- Hole Puncher -- Wood for rolling up kite string Optional: markers , crayons, or colored pencils

Step 2: Measure/Cut Out Kite

First, get out your 8 1/2 by 11 inch sheet of paper and a ruler. On both 11" sides, measure out 7 inches from the bottom of the paper and mark with a pencil. Then, on both of the 8" sides, measure out halfway (4.25 inches) and mark with a pencil. After that, connect the marks in a diagonal pattern (see picture). Cut out along the lines you have just made. You should now have a piece of paper that resembles a small kite. *NOTE* Save your corner scraps for later.

Step 3: Decorate!!! (optional)

Now, here comes an extremely fun step! Get out your arts supplies, because we're decorating out kite! Let your creative juices flow and draw whatever you want on your kite. Just stray from painting your kite; paint makes the kite heavier and it won't fly as well. When I did my kite, I chose to draw a pattern out of markers that made my kit look like it was woven out of fabric. I also decided not to draw on both sides. This is because the marker shows through to the other side, and additional coloring is not needed. If you feel like decorating on both sides, that is perfectly fine!

Step 4: Cutting Struts & Punching Holes in Struts

Once you have your kite looking fabulous, now you can move on to the more fundamental parts of the kite. To begin, get out your scissors and sheet of plastic. Cut out two strips of plastic, each about 1/4 inches wide. You can either measure the length/width of the kite before you cut (one strip should be 8.5 inches, one strip should be 11 inches) or you can compare them to your kite, and cut off the unneeded sections after you have the strip. They should fit across your kite in a cross shape. Now, lay them across your kite. Look at where the horizontal (across) strip overlaps with the vertical (up and down) strip. Starting at the horizontal strip, measure about 1-2 inches above onto the vertical strip. Mark that spot with a marker dot. Then, go down from the horizontal strip and mark with a dot also. Now, take your hole puncher and punch out the dots on your vertical strip. Using a pencil, punch a hole in the paper where the holes on the vertical strip lines up. Finally, find the very bottom of your vertical strip and punch a hole in it. This is where the kite's tail will hang. Punch a hole in the kite where the strip lines up with it.

Step 5: Glue on Struts

After you have your holes punched in the struts, you can now work on attaching them to your kite. First, retrieve your hot glue gun. Hot glue guns can be dangerous, so be VERY CAREFUL when using them. If you are inexperienced with hot glue guns, please seek help. Gluing: Place a glob of glue in each corner of your kite and glue your struts in the cross shape. Make sure not to cover the hole at the bottom of your kite.

Step 6: Add Kite String

Now that you have your struts on the kite, you can add the kite string. First, find one end of the string. Then thread the string, starting from the side of the kite without struts, through the paper and then the middle hole on the vertical strut that is about in the middle of your kite. Then, thread the string over your horizontal strut and out through the strut and paper hole near the top of the kite. Your string should now enter and exit on the side without the struts. Take the end, and leaving a large triangle of extra string, tie the knot (see picture). Now, find the other end of the string. Using your hot glue gun, glue that end to your wood handle somewhere in the center. Make sure the string is secure, and wrap the string around the wood neatly.

Step 7: Add on Tail and Tail "Feathers"

Now, take a small length of separate string ( about 1 1/2 to 2 feet long) and tie it around the hole at the very bottom of your kite. Make sure you loop it through both the plastic, and the paper hole (both at very bottom). Check to make sure it is tied securely. Once you have your tail on the kite, now you can add the tail "feathers." These will make the wind catch on the kite and it will fly better. Using your corner scraps from cutting out your initial kite, separately twist the papers in the middle. You should now have 3 or 4 bow-tie shaped paper pieces. Using your tail string, one by one tie on the feathers using the string. Tie them in the middle. You should not need any extra string other then your tail.  If you have an excessive amount of extra string hanging from your tail, cut off a bit, just make sure to keep a little.

Step 8: Go Out and Fly!

Now that you have finished your kite, go out and fly it! This kite should work if done properly. Make sure it is a very windy day and you have lots of string on your kite.

Finalist in the Kite Contest

Be the First to Share

Did you make this project? Share it with us!

Recommendations

Halloween Contest

Project-Based Learning Contest

Jewelry Contest

10 years ago on Introduction

Hey Everyone! Thanks for checking out my first instructable!

9 years ago on Introduction

i see the frame is on the opposite side as ste string.

but it looks better, if the painted side of the sail shows to the string and not to the frame.

I think, the frame shoult be on the back side of the kite, where no drawing is.

so the wind pushes the sail against the frame

Great first instructable!!

Reply 10 years ago on Introduction

How To Make A Flying Kite With Paper: Step-By-Step Guide

Kite-making has been a tradition all over the world for thousands of years. Kites are used for ceremonies, celebrations, fun, and even battles. Every person should fly a kite at least once in their life, but what if you do not have the budget for a kite or if you do not have access to buying a kite? Paper kites are the solution! Here is how to make a flying kite with paper, a step-by-step guide!

Paper kites are inexpensive and easy to make. They come in many varieties and can be made from simple or complicated designs. All you need is paper, a ruler, tape, a pencil, scissors, sticks or staws, thread, imagination, and time! Paper kites fly well, look great, and can be flown by anyone.

Making a paper kite is great fun for everyone. There are simple designs that can be made by children or novice kite makers, and there are complicated designs for those who are looking for more of a challenge. Whichever kite you choose, making a paper kite is worth the time and effort! Let’s go over how to make various paper kites, the materials that you require, and how well these kites fly!

What Do You Need To Make A Paper Kite?

Kiting Planet is an Amazon Associate. As such, we earn a small commission from purchases made when using links in our content. KP also affiliates with other vendors.  Full info here.

There are many various types of paper kites, each of which is unique and have their own building process and methods.

However, there are a few basic tools, supplies, and implements that are required to make paper kites, regardless of their design or complexity.

Some paper kites can be made with items that everyone already has in their homes, and others may require some extras that may need to be specifically purchased to build the kite.

The list of basic items and tools required for building any paper kite is as follows:

• Paper  for the mainsail/sails of the kite.
• Adhesive tape  to attach the parts of the kite together (preferably as lightweight as possible).
• Sticks, straws, or skewers  to use as struts and supports for the kite.
• Scissors  to cut and shape the paper for the kite.
• A ruler  for making measurements, folding along, and cutting straight lines.
• A pencil  for drawing lines and marking measurements.
• A hole-punch/sharp skewer  for making holes in paper.
• Sewing thread, or kite string  – as lightweight and strong as possible.
• Every paper kite requires the same basic materials for construction, but the most important requirement is to enjoy the build! Take your time, follow the steps, make your kite unique, and have fun along the way.

Which Paper Is Best For A Paper Kite?

Paper kites have been designed and constructed all over the world for many, many years. They have been made from various types of paper and materials. the type of paper that is used for a kite largely impacts the way the kite is constructed and how well it flies.

Different types of paper are used to make the various kite types, and the paper that I used often determines the properties of the kite, such as size, shape, weight, design, and flying ability.

The paper that is used for making a kite is vital, but there are many different types of kites that can be made from each type of paper, so if you only have access to only one type of paper for kite making, do not feel held back in any way.

The main types of paper that are used for paper kite making in the modern world are:

• Standard A4 printer paper
• Letter paper
• Tissue paper
• Gift wrapping paper
• Origami paper

The reality is, almost any type of paper can be used to make a paper kite. The success of the kite is dependant on the design that you use to make the kite out of the paper that you have.

Printer paper is much heavier than some other type of paper, so it should only be used to make kites that are more likely to fly and have a greater amount of lift than other kites, such as sled kites.

Newspaper is similar, but a little lighter than printer paper and is also only ideal for the more powerful kite types.

The very lightweight papers such as rice paper are ideal for smaller kites, simple kites, and indoor kites.

That being said, the ideal paper for making paper kites is tissue paper. This paper is very lightweight, easy to find, easy to work with, and almost any kite can be made from it.

Tissue paper is stronger than you may think, and it has been used to make many variations of traditional kites for generations.

Any paper can be used to make any kite design, but some papers work better for certain designs than others do. Experiment to find the best type of paper for your favorite kite design, or simply use whatever paper you already have! The sky is the limit!

Constructing a flying paper kite is one of life’s great pleasures! There is nothing quite like it, and the time and effort that you put into building your kite will pay off in hours of enjoyment.

There are many different types of paper kites that can be built with regular paper and the simple household items and tools that we have mentioned above.

Let’s go through, step by step, how to make two of the best flying paper kites around, keeping it to the two most simple paper kites to construct.

The two types of paper kites that will be covered here are the Single-Sheet Paper Sled Kite, the Single-Cell Tetra Paper Kite. Both of these kites fly well, require only basic materials, and are simple to make!

Single-Sheet Paper Sled Kite: Step By Step

This simple kite requires very few materials and is very easy to make. It is the perfect kite for beginners as well because it does not require much wind at all to fly and is very easy to get off the ground!

For this kite, the materials you will require simply one piece of A4 printer paper, adhesive tape (preferably the ½” clear kind), sewing thread, and a hole punch/sharp skewer for making holes in the paper.

Step 1 – The Center Line:  find the centerline of your A4 printer paper by bending the four verticle corners of the paper over so that both verticle edges of the paper meet. Try to be as accurate as possible.

Do not fold the paper; simply crimp the two centerline points that are found by bending the corners of the paper to meet. Lay the paper flat, and you should see to kinks in the paper. This is the centerline.

Step Two – Fold The Spars:  fold the edges of the paper vertically so that both edges of the paper meet in the exact center of the page. Press firmly, and make the folds as sharp and crisp as possible.

Next, turn the page over and lift out one of the flaps. Turn the paper so that the flap faces you. Using both hands, grasp the folded seam of the flap, and fold a thin width of the paper underneath the main body of the paper. Apply a layer of tape all only the small fold to keep it in place.

This formes one of the spars of the kite, which provides integral support.

Repeat this step on the other flap of the paper, and try to make it symmetrical with the first spar.

Step Three – The Landing Edges:  the paper should now be open with two spars equidistant from each other. The next step is to take two of the corners of the paper and bend the paper over to line them up.

Fold the two corners together into a triangle, then point down toward the bottom of the kite. Make sure that be fold are as firm and crisp as possible. This is important!

Open the kite, and there should be two downward flaps, one at the top of each edge of the paper. Press these folds down to be as close as possible, and then fold the flap backward on the same line, and press it down again.

Fold the flaps back and forth multiple times t weaken the paper and then use the seam to tear the triangle flap off of the paper.

Step Four – Install The Bridle:  the bridle is important, as it is how the kite is controlled in the air.

At this point in the process, the kite should be able to bend inwards without folding the paper and have the two torn-off corners meet to form a downward angle at the top of the kite.

Once the paper is bent inwards so that the torn edges meet, use the hole punch or sharp skewer to make a hole through the paper, going through both sides, just below the upper corner of the torn edges.

Next, cut a piece of sewing thread to be at least 60cm (23.6”) long.

Open the paper back up, and tight one end of the thread through each hole without crumpling the paper. This will connect both sides of the kite sail together with the thread.

Find the centerline of the kite again, and tie a small loop into the thread exactly in line with the centerline of the kite.

Step 5 – Attach A Flying Line:  the final step of building this kite is to attach the flying line, which is the line that you hold onto when flying a kite.

You may use a very long section of the sewing thread, or you may attach the kite to the entire spool of thread to allow for maximum flying height if you would like to.

Simply tie one end of the sewing thread onto the center loop of the bridle, and be sure that it is as tight as possible.

Step 6 – Fly The Kite:  the kite is complete! The last thing left to do is to take it outdoors and fly it!

This kite requires only very light wind to fly well, and if there is no wind whatsoever, jog slowly with the kite trailing behind you to achieve lift-off.

Slow winds of 5 – 8kmph (3 – 5mph) are best for this kite, so do not try to fly it on a very windy day!

You can also waterproof a paper kite Anna, Kiting Planet

The Single-Cell Tetra Paper Kite: Step By Step

This paper kite is simple to make and beautiful to watch in the air, as it requires a tail to fly well, which makes it look majestic in flight.

All that is required for this kite is two sheets of printer paper, adhesive tape (3/4” preferably), scissors, a pencil, a ruler, and lightweight sewing thread.

Let’s go over the steps of making this simple yet elegant paper kite.

Step One – Construct The Sail:  set a piece of paper in landscape orientation on a flat surface, and measure 20cm (8”) down each length of the paper, and make a mark on the edge of the page. Make another mark 20cm (8”) up from the bottom left of the page.

Draw a line from the last mark, horizontally across the page, until it is in line with the mark you made on the top edge of the page. Draw a line to connect each horizontal edge mark, and you should be left with a square marked off on the page, with a thin strip leftover at the top.

Cut the square out of the page, and save the leftover paper.

Step Two – Construct The Tail:  place the second piece of paper on the flat surface in landscape orientation as before.

Measure and mark  20cm (8”)  along the bottom horizontal of the page. Next, make four marks vertically on the page,  each 5cm (1.9”) apart . Make the same marks on the left verticle edge of the page.

Connect the verticle marks with a line vertically, and make horizontal lines across the page where the marks line up, making four straight horizontal lines and one straight vertical line on the page.

Cut along all the lines to create four equally sized strips of paper. Tape the strips of paper together end to end and fold any excess tape over the edge of the paper.

Step Three – Split And Attach The Tail:  place the original square of paper, the sail, in a diamond orientation on the flat surface. Line up the tail with the bottom point of the sail so that the corners of the tail are flush with the edges of the sail.

Tape the tail to the sale, front, and back. The front joint should be horizontal across the width of the tail, and the back joint should be attached with two pieces of tape placed in line with the edges of the sail and slightly folded over the tail.

Split the tail in half with the scissors, cutting in two directly up the middle. Start at the end of the tail not attached to the sail, and stop near the sail at the top of the sail. This should split the tail into two strips.

Step Four – Make a Towing Point And Crosspiece:  find the centerline of the kite sail, and crease it sharply all the way from tip to tail. Make a small hole in the centerline about 9cm (3 ½”) from the tip of the sail. Lay two small squares of tape below the hole, on the tail side, right on top of each other.

Cut a 20cm x 5cm (8”x 2”) rectangle of paper from the leftover paper from before. Crease the rectangle very lightly all the way along its long centerline.

Hold the piece of paper horizontally, and roll it into a tube. Secure the tube with four pieces o tape, placed evenly along the tube. This forms the crosspiece.

Step Five – Attach Th Crosspiece:  attach the crosspiece horizontally from one point of the sail to the other by flattening each end of the crosspiece and taping it as close to each horizontal point of the sail as possible.

Tape the crosspiece in very securely. Fold the overhanging tape over the front of the sail to help keep it in place.

This should cause the sail to crimp and be bent inwards by the crosspiece.

Step Six – Attach A Flying Line:  pull some sewing thread through the hole that was made in the center of the kite. Pull about 4cm (1 ½”) of thread through the hole and stick it down on the tape that you placed earlier.

Lay more tape over the thread and the hole to keep the thread in place and prevent it from slipping out.

Step Seven – Fly The Kite:  all that remains is to take the kite outdoors and fly it!

This paper kite requires moderate winds to fly well and should be flown at quite high altitudes compared to other paper kites.

Run fast, or choose a windy day to fly this kite, and it will work well for many hours!

Paper kites are made all around the world, for various reasons and in various designs, but the most simple designs are always best when it comes to building these little marvels!

Take your time, collect the right tools and equipment, follow the instructions carefully, and you will be flying your paper kites in no time!

Just be sure to look after your kites, as they are made of paper, and provided there is enough wind, they will last for many hours of happy flying!

From flying small beach kites, hang-gliding in the dunes of Outer Banks, NC parasailing throughout the Caribbean to paragliding in Maui, HI, Anna has been flying kites for decades. An arts and crafts buff, making kites for the kids was a fun activity for the family. Now she writes about kites to introduce others to all the fun.

Similar Posts

Is Saltwater Bad For Kites? (Let’s Find Out)

Is saltwater bad for kites? Kitesurfers are still debating whether they should wash their kite with salt or freshwater. While some say saltwater can damage a kite, some say it can prevent mold and mildew from growing on it.  Saltwater is bad for kites. It can weaken and damage your kite once the salt crystallizes…

What Is A Diamond Kite, And Are They Any Good?

Diamond kites have been one of the most common kites known to all. All ages from around the world can fly a diamond kite, and what’s more, is that you can even make one. It is because they are easy to make. The materials can be found at home and can use recycled parts to…

Can Normal Thread Be Used For A Kite?

Having the right kite line has a direct impact on kite performance. You may be wondering what thread to use on your kiting equipment. This article provides an in-depth look at the kind of threads that should be used on kites.  Kite lines used for toy kites, stunt kites, kitesurfing and normal threads differ significantly….

The 3 Best Cord Manjas For Kites

Are you curious about kite fighting? This sport requires specialized lines known as cord manjas. In this article, we get into the three best cord manjas used for kites. The three best cord manjas for kites are the six cord, nine cord, and twelve cord Manja. The cords are the number of small lines combined…

The 8 Best Shapes For Kites: What Is The Best Shape For A Kite?

Kites have always been fascinating. Watching colorful kites in different designs is so amazing that many countries have facilitated their kite festival. It has become the worldwide sport, pastime, and recreation for many people in almost every culture.  Over the years, kite festivals showcased unique designs and bewildered the audience. Kites have come in their…

How Many Ounces Does A Kite Weigh?

Should one take note of the weight of a kite before purchase? How does one determine the mass of a kite? This article delves into kite weight and what this means for kite flying. The major components are the kite surface and the kite frame. To find the total weight, we add the weight of…

Origami Guide

Origami Instructions – Learn How To Make Origami

How To Make An Origami Kite Fold

Page 1 of 1.

Origami Kite Fold

Level: Beginner

Copyright: Traditional ?

Time Needed: Approx. 5 Minutes

Tools: None

Supplies: 1 Sheet of Square Paper

One of the simplest origami folding techniques, the origami kite fold is just three folds to create a kite shape. The method of folding diagonal edges to align with a central crease is repeat many times in many different origami sequences.

Origami Kite Fold Instructions

Scroll down to follow the photo tutorial for the Origami Kite Fold .

Made this origami? Leave a comment & submit your photo on the last page here .

Made this origami? Leave a comment & submit your photo here .

1. This is the back of the paper (usually white).

2. Fold the bottom corner up to the top corner.

3. Unfold the previous step.

4. Now take the lower right diagonal edge and bring it up to align with the central crease.

5. Bring the top right diagonal edge down to align with the central crease.

6. Rotate the paper, now it's a kite shape! The origami kite fold is complete.

Your Origami Kite Fold is Complete!

You’ve completed the Origami Kite Fold, why not check out our other Folding Techniques, here . Did you make this origami? How did it go? Leave a comment & submit your photo here . Related origami: Folding Techniques

Origami topics: Origami | Origami Instructions | How To Origami | How To Do Origami | Origami Folding | Origami Craft | Origami Tutorial | Origami Step By Step | Origami Lessons | How To Make Origami | Paper Origami | Origami Gifts | Beginners Origami

What Folding Techniques To Fold Next?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

 Subscribe to the free mailing list?

Attachment The maximum upload file size: 4 MB. You can upload: image . Drop file here

This site uses Akismet to reduce spam. Learn how your comment data is processed .

4 Comments for “How To Make An Origami Kite Fold”

i love this origami its my first time trying it and turned out great!I would rate 5 stars

This was different

Easy and Fun.

Origami kite

Origami Categories:

Sign Up For Our Free Origami Newsletter

Join our free mailing list to get an email when brand new origami tutorials have just been added. You can also expect some freebies such as printable origami paper and news updates too!

You will never get any spam from us.

Success! Check your inbox or spam folder now to confirm your subscription.

DIY Website

How to make a diy paper kite?

If you’re looking for a fun, easy, and inexpensive DIY project, look no further than a paper kite! Paper kites are a great activity for kids and adults alike, and can be made with just a few basic supplies. In this guide, we’ll show you how to make a paper kite in just a few simple steps.

There are many ways to make a paper kite, but here is one easy way.

1. You will need: two bamboo skewers, scissors, pencil, ruler, clear tape, string, and a square piece of paper.

2. Start by tying the string around one of the bamboo skewers. Make sure the string is taught.

3. Next, use the ruler and pencil to draw a diagonal line across the corner of the paper. Cut along this line.

4. Now you should have two triangle pieces of paper. Take one of the triangles and taped it to the string-covered skewer.

5. To make the frame of the kite, take the other bamboo skewer and tape it perpendicular to the first skewer, about halfway down.

6. Now take the other triangle of paper and tape it to the two skewers to complete the kite frame.

7. All that’s left to do is decorate your kite and fly it!

How do you make a simple paper kite?

To make a paper bag, start by folding a piece of paper in half lengthwise and stapling the folded corners in place. Then, punch a hole where you made the second mark and thread a piece of string through it. Finally, fold the top of the paper down to the string and tie the string in a bow to secure the bag closed.

A kite is a great way to enjoy a day outdoors! Here’s how to make your own:

1. Draw your kite sail on a piece of paper or a paper bag. Lay it smoothly on a flat surface and mark three dots to form an isosceles triangle.

2. Cut out the kite sail.

3. Build your kite structure. You can use sticks, straws, or anything else that will hold up the kite sail.

4. Attach your kite line. Make sure it is strong and won’t break easily.

5. Make a tail. This will help keep the kite stable in the air.

What do you need to make a paper kite

This is a great activity for a windy day! You’ll need a piece of paper, a wooden skewer, kite string, ribbon, and tape. If you don’t have a wooden skewer, a straight drinking straw will work fine.

To make the kite, first fold the paper in half lengthwise. Then, cut a small triangle out of the folded edge. Next, poke a hole in the center of the triangle and thread the kite string through. Tie the string securely.

Now, decorate your kite however you’d like! You can use the ribbon to make a tail, or add streamers. Once you’re finished decorating, tape the skewer to the paper.

Now you’re ready to fly your kite!

A paper kite is a great activity for children. They are easy to make and can be flown in many different ways.

What are the 7 steps to making a kite?

Materials: a plastic bag, string, two sticks, scissors and ribbon

1. Cut two sticks to desired kite size. 2. Tie the sticks together at the top and bottom with string. 3. Cut the sail out of the plastic bag. Make sure it is the right size for your kite frame. 4. Tie the sail to the frame with string. 5. Attach the flying string to the top of the kite frame. 6. Make a ribbon balance by tying a ribbon to the bottom of the kite frame. 7. The hardest step – find wind and fly!

First fold a 45-degree angle by bisecting one of the 90-degree corners. Fold a short side onto the long side, lining up the creases. Then fold the triangle in half by bringing the short sides together. Finally, fold the triangle in half again, making a smaller triangle.

What is the easiest type of kite to make?

There is a huge variety of single-line kites to choose from, including diamond kites and delta kites. Single-line kites are easy to assemble and fly, making them great for beginners. With so many colors, patterns and sizes to choose from, there is sure to be a single-line kite that is perfect for you!

To avoid power lines and nearby trees, always launch your kite from a open area. Hold the line in one hand, and the kite in the other. Let the wind catch the kite and then let go. With the right kite and the right wind, you shouldn’t have to run.

How do you make a perfect kite

To make a kite, you will need:

-A kite sail -A kite frame -A flying line -A kite tail -Decorations (optional)

1. Fold the edge of the sail over the frame and glue and tape it down.

2. Attach the flying line.

3. Make a kite tail with a 6 ft (18 m) long piece of thick string. Attach pieces of cloth or ribbon to the tail at 1 foot (030 m) intervals.

4. Decorate the kite with markers or colored paper (optional).

Welcome to the world of kite making! In this tutorial, we’ll be covering how to make the top angle of your kite approximately 150 degrees. This will ensure that your kite flies properly and doesn’t end up getting tangled in the wind.

Cutting your washi paper into a diamond shape is the first step. You’ll want to use sharp scissors or a rotary blade to make clean, straight cuts. Once you have your diamond shape, ask an adult for help with the next step.

The next step is to fold your diamond in half, making sure that the top point is at the center. Once you’ve done this, fold it in half again and then in half once more. This will create a triangle shape.

Now it’s time to cut the triangle shape out. Make sure that you leave a small tab at the top so that you can connect it to the kite string later. Once you’ve cut out your triangle, open it up and you should have a perfect kite shape!

Now all that’s left to do is decorate your kite however you’d like and then connect the string. Once you’ve done that, you’re ready to fly!

Is paper kite better than plastic?

Paper kites are preferred over plastic kites because they are more graceful. When a paper kite and a plastic kite are sent up at the same time, it is the paper kite that will be admired. The plastic kite is nothing, in fact it is a put off.

In order to make a kite, you will need the following materials: a sheet of 85” by 11” paper, construction paper, card stock, a thin wooden stick or bamboo skewer, tape, lightweight string, lightweight ribbon, pencil, scissors, and a hole punch (optional). Once you have gathered all of the materials, draw a dot about a third of the way down the spine of your kite and about half an inch from the edge. Next, use the hole punch to make two holes at the top of the kite, about an inch apart. If you do not have a hole punch, you can simply cut two slits with the scissors. Now, thread the string through the holes and tie it off. Pass the end of the string through the loop to secure it. Make sure that the string is not too tight, as this will make it difficult to fly the kite. Finally, tie the ribbon to the end of the string and your kite is ready to fly!

Can you make a homemade kite

When making a DIY kite, it is better to make a larger kite than a smaller kite. A smaller kite will not fly as well as a larger kite. It is not recommended to make a kite any smaller than 24 inches long. For a diamond kite, you will need two relatively long dowels. It is best to use one that is 40 inches long and one that is 32 inches long.

Making a kite is a fun activity that can be enjoyed by people of all ages. In order to make a kite, you will need a few supplies including straws, tape, scissors, and a plastic bag. First, place tape near the ends of the straws and halfway between the ends and where the straws cross. Next, use the ruler and marker to draw a diamond shape around the “t”. Cut out the diamond shape using scissors. Finally, take the scraps left from the plastic bag and cut a long streamer to create a tail for the kite. Now you’re ready to fly your kite!

How do you make a kite fly high?

If you want to fly a kite, you’ll need to find a place with enough open space and a steady wind. Start by holding your kite up by the bridle point and letting the line out. If there’s enough wind, your kite will go right up. Let the kite fly away from you a little, then pull in on the line as the kite points up, so it will climb. Repeat this until your kite reaches the altitude where there’s a good, steady wind.

We need we’re ready to make our kite lay the dowels Across the plastic in a cross shape with one of the dowels on top of the other. We then take our kite string and tie it to the top dowel making sure it’s tight. We do the same with the bottom dowel. Now it’s time to make the bridle. The bridle is what actually controls the kite. It’s basically a bunch of strings attached to the kite in specific places that determine how the kite will fly.

What is a delta kite

Deltas are a great choice for first-time kite flyers. They are easy to fly and can take off in fairly light winds. Their flexibility also allows them to fly well in a range of wind conditions, making them a versatile kite to have in your arsenal.

A kite has 4 interior angles and the sum of these interior angles is 360°. In these angles, it has one pair of opposite angles that are obtuse angles and are equal.

1. Begin by folding a sheet of paper in half lengthwise.

2. Cut a hole in the center of the paper, slightly smaller than the width of the paper.

3. Unfold the paper and cut two slits in the center of the paper, about an inch apart.

4. Fold the paper in half again and slide a bamboo skewer or other thin rod through the slits.

5. Tie the ends of the paper around the rod to secure it.

6. Cut a V-shape into the bottom of the kite.

7. Decorate the kite as desired and fly it outdoors!

A paper kite is a great activity for a windy day. You can make a paper kite using a few household supplies. You will need a piece of paper, a pair of scissors, and some string. First, cut a diamond shape out of the paper. Next, cut two slits in the top point of the diamond. Thread the string through the slits and tie a knot. Finally, hold the kite up to the wind and let it fly!

Amber Kelley

Amber is a DIY enthusiast who loves to make her own things. She's always trying to find new ways to be creative and connect with others. She's also an artist, a musician, and a lover of all DIY things.

Leave a Comment Cancel reply

A Two-Step Homemade Kite for the Kids

Seriously, all you need is four simple things.

It's not summer without a little kite-flying action. Sure, you can buy one cheap enough, but why not get creative and extend the family fun by making your own. It comes together fast!

WHAT YOU'LL NEED:

• A roll of clear contact paper

More From Good Housekeeping

• A ball of string

• Straws (two for the width, three for the length)

• Scissors to cut out tissue paper shapes

STEP 1: Tie straws together at the center with string. Cut contact paper into two diamond shapes; peel backing off one and place sticky side up. Press straws onto paper.

STEP 2: Stick tissue paper shapes all over, then top with second diamond sheet. Loop string around each corner, then tie them together for the bridle. Add a ribbon tail.

This story originally appeared in the July 2015 issue of Good Housekeeping.

@media(max-width: 64rem){.css-1yxmhzw:before{background-repeat:no-repeat;bottom:-0.2rem;color:#ffffff;content:'_';display:inline-block;height:1.25rem;line-height:1;margin-bottom:0.5rem;margin-right:0.625rem;position:relative;width:1.25rem;}.loaded .css-1yxmhzw:before{background-image:url(/_assets/design-tokens/goodhousekeeping/static/images/Clover.5c7a1a0.svg);}}@media(min-width: 48rem){.loaded .css-1yxmhzw:before{background-image:url(/_assets/design-tokens/goodhousekeeping/static/images/Clover.5c7a1a0.svg);}} Crafts & DIY Projects

Cheap and Easy Greenhouse Plans for Your Backyard

25 Easy Napkin Folding Ideas

How to Make Easy Paper Snowflakes

85 Easy and Fun Fall Crafts for Adults

The Best Homemade Fly Trap

How to Make a Fleece Tie Blanket

50 Easy and Fun Crafts for Kids

50 Fun and Unique Craft Ideas for Adults

65 Easy Upcycling Ideas for Every Skill Level

How to Make Bath Bombs

How to Fasten Off in Crochet

• For Small Kids
• Simple Kites
• Better Kites
• Indoor Kites
• Paper Kites
• Kiting Knots
• Stories & Photos
• Flight Reports
• Kite Trains
• Aerial Photos
• Earliest Years
• Aerial Photog.
• Accessories

How to Make a Kite

27 better kites step-by-step.

If you want to learn how to make a kite or two, you have definitely come to the right spot!

Perhaps you have made  plenty,  but are always on the lookout for more designs and ideas. In any case, some of the most popular single-line designs being flown in the Western world are covered here.

For example, there's

• the quick and easy  sled
• the universally recognized  diamond
• the bird-like  delta,  which is nearly as well known
• the  barn door, which is uniquely American
• the classic  roller , which has German origins
• plus a number of others for even more of a building challenge

And the kiting culture of Japan is represented with the rokkaku and the sode .

(Regarding that pinnable image — it's much bigger when pinned.)

How to Make a Kite— Cheaply !

The emphasis here is on very cheap materials . Make them all for just a few dollars!

Not only that, but hardly any tools are required. Who hasn't got a pair of scissors and a ruler lying around somewhere? Perhaps you might need to beg borrow or steal, I mean buy, a small hacksaw. But that's about it! No special fittings or expensive specialized tools are needed.

Learning how to make a kite from bamboo skewers or dowel and plastic is fun and they do fly really well! You can see for yourself in the video for each design, showing the original in flight.

Dowel Series

(fairly big, light to moderate winds)

2-Skewer Series

(medium, light to moderate winds)

1-Skewer Series (quite small, mainly moderate winds)

In addition, there are three  box kites.

These all fly well in  moderate  winds, and the 2-Skewer design can cope with much stronger winds as well:

• the  Dowel Box kite
• the  2-Skewer Box kite
• the  1-Skewer Box kite

Wind  Speed Handy Reference

Light Air 1-5 kph 1-3 mph 1-3 knts Beaufort  1

Light breeze 6–11 kph 4–7 mph 4–6 knts Beaufort  2

Gentle ... 12–19 kph 8–12 mph 7–10 knts Beaufort  3

Moderate ... 20–28 kph 13–18 mph 11–16 knts Beaufort 4

Fresh ... 29–38 kph 19–24 mph 17–21 knts Beaufort  5

Strong ... 39–49 kph 25–31 mph 22–27 knts Beaufort  6

High Wind 50-61 kph 32-38 mph 28-33 knts Beaufort  7

Gale 62-74 kph 39-46 mph 34-40 knts Beaufort 8

Some Odds'n'Sods

Most of those dowel kites employ a bowed cross-spar . Follow that link for tips on how to get the curvature and weight just right.

See how I made a simple winder for our 20-pound line. This is good for the skewer kites.

Since doing a page on single-surface star kites from around the world, I thought why not do a skewer version. So here they are—instructions for an MBK Skewer Star . 

Finally, with plenty of people successfully making and flying the original 2-Skewer Delta, a link to that page is retained here:

Try the original 2-Skewer Delta .

( Note:  MBK skewer kites are made from  thin  12 inch bamboo skewers, which come in packs of 100. The metric size is 300 mm long x 2.5 mm thick; 3 mm skewers are usable but 2.5 mm is best!)

More MBK Kite Info

For each kite in the lists of links up there, plus the box kites, there is

• a 20 second video of the kite in flight
• a template graphic showing you the sail shape and dimensions
• a detailed set of step-by-step instructions, with a photo for each step
• a launch photo or an inflight closeup of the kite

Although this is quite basic kite making, the designs  do  get a little more complex and time consuming as you move from sled right through to dopero.

The 2-skewer designs have about four times as much sail area as the 1-skewer designs. Hence, it's easier to make them accurately. Plus, for any given sail material, a 2-skewer kite will be better in light breezes than a 1-skewer kite. The 1.2 meter dowel kites are another step up again, with a roughly fourfold increase in sail area compared with the  2-skewer  kites! However, the strength-to-weight ratio of hardwood dowel is not as good as bamboo.

If you haven't made many before, I hope you really enjoy learning how to make a kite!

Have a bit of fun trying to figure out  which  of my kites is zipping around the sky in a gusty moderate breeze, in the video up there!

You Might Like These

Knot Tying Instructions - All The Kiting Knots Used For MBK Designs

These knot tying instructions cover every knot used in making the whole range of MBK designs.

Kite Plans For The MBK Series Of Kites.

Kite plans, as opposed to step-by-step instructions, are handy for experienced kite builders. Here's plans for dowel / bamboo sparred kites with plastic sails.

How To Make Soft Kites - Easily And Very Cheaply!

Learn how to make soft kites, from nothing more than plastic bags and packing tape. Only sound and well-tested designs here. All is explained, step by step with large photos.

How To Make Paper Kites - Even The 'Sticks' Are Just Paper & Tape!

Learn how to make paper kites, from just A4 or Letter copier paper and sticky tape. Explained step by step with close-up photos. Only sound and well-tested designs here.

How To Make Indoor Kites - Just Paper, Tape and Plastic Sheet!

Learn how to make indoor kites, from just A4 or Letter 80gsm paper, sticky tape and plastic sheet. Step by step with photos. Well-tested designs.

How To Build Kites - 3 Extremely Simple Kites For Adults Or Big Kids!

If you want to know how to build kites, you are at the right place. These 3 simple kites are super quick and easy, yet fly really well.

Make A Kite For Kids - The MBK Tiny Tots Diamond

This MBK kite for kids is about as simple as a Diamond can get! Do you have some bamboo BBQ skewers, tape and some plastic bags?

© Copyright 2007–2023 by Tim Parish, owner of my-best-kite.com.  All rights reserved. Unauthorized copying prohibited.

Images may be pinned with utter abandon!

To read the PRIVACY POLICY of this site,  click here .

Easy Step-by-Step Guide: How to Make a Paper Kite

Introduction.

Flying a kite can be a fun rewarding activity especially if you make the kite yourself. Making a paper kite is a simple enjoyable craft that can be done by people of all ages. In this step-by-step guide we will take you through the process of making a paper kite using easily accessible materials.

To make a paper kite you will need the following materials:

• A sheet of paper (standard letter or A4 size)
• 2 sturdy wooden sticks (one longer than the other)
• String or twine
• Markers crayons or colored pencils (optional)

Step 1: Prepare the Paper

Start by taking the sheet of paper fold it in half lengthwise. Make sure to create a crease in the middle then unfold the paper. This will act as a guideline for the next steps.

Step 2: Form the Frame

Take the longer wooden stick place it along the crease that you made in the previous step. Position it so that it extends a few inches beyond the top bottom edges of the paper. Use tape or string to secure the stick in place.

Next take the shorter stick position it horizontally across the center crease about a third of the way up from the bottom edge of the paper. Again use tape or string to secure it in place.

Step 3: Attach the String

Cut a piece of string or twine approximately twice the length of the longer wooden stick. Tie each end of the string to the ends of the longer stick creating a diagonal line. This string will act as the bridle of the kite will help stabilize it during flight.

Step 4: Create the Sail

Decorate the paper by using markers crayons or colored pencils if desired. This will give your kite a personal touch make it stout in the sky. Be creative let your imagination soar!

Step 5: Attach the Sail

Align the top edge of the decorated paper with the longer stick tape or glue it to the stick along the entire length. Make sure the longer stick is centered with equal portions extending beyond the paper on each side.

Trim any excess paper around the edges to achieve the desired kite shape such as a diamond or triangle shape.

Step 6: Add the Tail

Grab a few strips of paper or lightweight fabric attach them to the bottom edge of the kite. The tail adds stability to the kite helps it fly smoothly in the wind. Experiment with different lengths colors to create a tail that matches your style.

Step 7: Get Ready to Fly

Find an open outdoor space away from trees power lines to fly your paper kite. Hold the string firmly let the wind catch the sail. If the wind is strong enough your kite will pull against the string soar into the sky. Enjoy the feeling of accomplishment as you watch your handmade kite dancing in the breeze!

Making a paper kite is a fantastic DIY project that allows you to personalize your kite have endless hours of fun flying it. With simple materials easy steps anyone can create their own paper kite enjoy the thrill of watching it take flight. So grab some paper sticks string get ready to soar!

Understanding Medications for Rheumatoid Arthritis: A Comprehensive Guide

Can t gel shampoo really help with hair loss here’s what experts say.

Can T Gel Shampoo Really Help with Hair Loss? Here's What Experts Say

Leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Finding the Optimal Distance: How Far Should You Walk to Improve Your Health?

Finding the Optimal Distance: How Far Should You Walk to Improve Your Health? Introduction Walking is a simple accessible form...

How To Relieve Burning Lower Back Pain

Can you get acne on your lip, does medicaid cover mental health therapy, does my child have social anxiety quiz.

© 2023 Tutorial

Welcome Back!

Login to your account below

Remember Me

Retrieve your password

Please enter your username or email address to reset your password.